فیلترها/جستجو در نتایج    

فیلترها

سال

بانک‌ها




گروه تخصصی











متن کامل


اطلاعات دوره: 
  • سال: 

    1402
  • دوره: 

    11
  • شماره: 

    2
  • صفحات: 

    61-74
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    154
  • دانلود: 

    27
چکیده: 

ABSTRACTDuring the last century, ports of Persian Gulf become the most important storage, refining and transportation of crude oil, oil derivation, petrochemical products and also, business activities. Nowadays, due to functional diversity between ports, the impact of port activities on the development of urban spaces will be different, and this issue leads to structural differences of port cities. The purpose of this research is to identify the key variables affecting the relations and spatial structure of port-city in Dubai as the most thriving and successful port-city in the Persian Gulf. This research is based on deductive reasoning and carried out by Analysis of cross effects with secondary data (results of other prominent articles) and also primary data (questionnaire). sampling method is based on purposive sampling and Micmac software was used to analyze the data. Output of Micmac software shows the position of the instability of the system. Therefore, the position of each variables in the conceptual model can be categorized to driver, linkage, dependent, and autonomous factors. The research findings indicate 4 variables (like as “income, cost and investmnets in port-city”) can be introduced as a driver factor, 5 variables (like as “advanced multimodal transportation in the port”) can be introduced as a linkage factor, 6 variables (like as “quality of living environment and desirable city”) can be introduced as a dependent factor, 3 variables (like as “environmental protection and sustainable development of the city-port”) can be introduced as an autonomous factor. The rapid development of Dubai can be explained by the purposeful distribution of revenues from trade and tourismExtended AbstractIntroductionDuring the last century, ports of Persian Gulf become the most important storage, refining and transportation of crude oil, oil derivation, petrochemical products and also, business activities. The global increase in oil demand since the 1950s led to the creation of discovery of new oil wells and large industrial areas. With the construction of new oil or gas facilities in the port areas, increasing oil revenues contributed to the countries of the Persian Gulf region and form a new geographical relationship between ports and coastal cities which had an impact on the spatial structure and relation of them. Nowadays, due to functional diversity between ports, the impact of port activities on the development of urban spaces will be different, and this issue leads to structural differences of port cities. In the 1950s, Containerization (container loading technology) was based in some of the world's ports and created a huge transformation in the shipping industry, which had a significant impact on the development of ports. Although the ports of the Persian Gulf have made a significant contribution to the economic growth and physical development of other ports in the world, but few researches have been done on the variables and factors affecting the development of the spatial structure of the important ports of the Persian Gulf. This region, due to its unique geographical location, has always been considered as a most important corridor in the field of economic and transportation throughout history. Some of the most important energy and commercial ports in this region are: Dubai, Manama, Kuwait, Dammam, Doha, Bushehr, Bandar-Abbas and Assaluyeh. In this regard, the purpose of this research is to identify the key variables affecting the relations and spatial structure of port-city in Dubai as the most thriving and successful port-city in the Persian Gulf. MethodologyThis research is based on deductive reasoning and carried out by Analysis of cross effects with secondary data (results of other prominent articles) and also primary data (questionnaire). The method used in this research is quantitative and the sampling method is based on purposive sampling. the variables affecting the spatial structure of port-city relations were identified in the form of a review of 31 prominent articles. 25 experts (who had comprehensive knowledge and information about the development process of the city-port of Dubai) participated to determine the effectiveness or influence of variables. Finally, the output of data Analysis was done by the Micmac software. Results and discussionOutput of Micmac software shows the position of the variables in the diagram that it indicates their status in the system and their role in the dynamics and changes of the system. The method of distribution and dispersion of the variables in the spatial structure of port-city relations indicates the instability of the system. Therefore, based on the output of the system, the position of each variables in the conceptual model can be identified in five categories (driver, linkage, dependent, autonomous and regulatory variables). According to the results, some variables such as “the changes in the strategic positions” and “geopolitics of port-city”, “the modification of the management method” and “regional planning of the ports”, “the promotion of local governance in the relations between port-city” and “the way of national and international management of ports have been introduced as driver variables. On the other hand, five variables consist of “advanced multimodal transportation in the port” and “income, cost and investment in the port-city”, “the contrast and physical integration of the port - city space”, “the development of various industrial and production activities in the ports and their local hinterland” and “their qualities Financial and commercial policies of ports” have been introduced as linkage variables. Findings of research also shows that some variables consist of “quality of living environment and desirable city”, “quantity and quality of transit corridors (rail, road and air) to hinterland”, “construction and launching the new port (sea port or dry port)”, “terminal facilities and infrastructure and warehousing”, “conflict or convergence between the city and the port” and “increase in population growth rate and migration to the port - city” categorized as dependent variables. Three variables including “cultural and historical background of ports”, “use of cheaper energy, Less-polluted, clean and renewable energies in the city-port” and “environmental protection and sustainable development of the city-port” categorized as autonomous variables. Finally, a variable with the title of “improvement in management and information technology and development in loading, unloading and storage of commodities” have been introduced as regulatory variables. The findings of this research have a remarkable similarity with other researches carried out in the field of city-port relation and clearly emphasize the direct impact of the "investment in port-city" in the development of them. For example, Grossmann (2008) emphasized that city-port of Hamburg has become one of the largest ports in Northern Europe during the last few decades due to huge domestic and foreign investment. ConclusionThis research carried out in order to introduce and explain the key variables affecting the development of the spatial structure of the port-city of Dubai. On this basis, 21 variables have been extracted by systematic reviews of prominent articles. In the following, 25 experts were selected with the purposive sampling method. Among the 21 variables extracted, 4 variables (like as “geopolitics of port-city”) introduced as a driver factor, 5 variables (like as “advanced multimodal transportation in the port”) introduced as a linkage factor, 6 variables (like as “quality of living environment and desirable city”) introduced as a dependent factor, 3 variables (like as “environmental protection and sustainable development of the city-port”) introduced as an autonomous factor. The rapid development of Dubai can be explained by the purposeful distribution of revenues from trade and tourism. A part of these revenues has been directed towards investment in important transportation infrastructures such as airports and ports of this city. These strategies have a wide impact on improving the economic growth of the city and the development of the port in order to adapt with the global trade and advanced technologies. FundingThere is no funding support. Authors’ ContributionAuthors contributed equally to the conceptualization and writing of the article. All of the authors approved the content of the manuscript and agreed on all aspects of the work declaration of competing interest none. Conflict of InterestAuthors declared no conflict of interest. Acknowledgments We are grateful to all the scientific consultants of this paper.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 154

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 27 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
نویسندگان: 

, ,

اطلاعات دوره: 
  • سال: 

    1403
  • دوره: 

    11
  • شماره: 

    3
  • صفحات: 

    5-17
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    6
  • دانلود: 

    0
چکیده: 

Facilities built in areas affected by earthquake activity, such as tunnels, which have always been an integral part of human life, must withstand both dynamic and static loading. It has led to the need for practical studies on the effects of earthquakes on underground structures and the factors affecting their destruction. For this purpose, in this research, at first different patterns of tunnel’s excavation were investigated and by using Plaxis 2D software and based on Tabas earthquake in Iran, sensitivity Analysis on geotechnical parameters of the soil surrounding tunnel such as cohesion, friction angle, unit weight and modulus of elasticity was carried out, and the parameters whose changes have the greatest and least effects on the bending moment changes on the tunnel lining are introduced. The results show that tunnel excavation patterns significantly affect the bending moment, axial forces, displacements, and surface settlement of the tunnel. Often, by dividing tunnel excavation area to small parts, the values of bending moment, axial forces, displacements, and surface settlement of the tunnel decreases in static Analysis. Also, outputs of sensitivity Analysis on geotechnical parameters of the soil surrounding tunnel showed that modulus of elasticity of the soil surrounding tunnel has the most effect and cohesion changes have the least effect on bending moment induced on tunnel lining..

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 6

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
اطلاعات دوره: 
  • سال: 

    1400
  • دوره: 

    52
  • شماره: 

    2
  • صفحات: 

    215-228
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    132
  • دانلود: 

    17
چکیده: 

To achieve favorable outcomes in breeding programs, selection of parents based on General Combining Ability (GCA) and Specific Combining Ability (SCA) is so important. In order to study the genetic parameters, general and specific combining abilities and the type of disease resistance genes action against take-all disease in bread wheat, 6 wheat genotypes (729, 1622, 2109, 1528, 1546 and 1526) were crossed in one-way diallel cross. Seeds of F1 generations (F1s) and parents were planted in the research greenhouse of Vali-e-Asr University of Rafsanjan, Iran and take-all disease tolerance, stem and root dry weights, tiller number and elements such as manganese (Mn), zink (Zn), potassium (K) and iron (Fe) concentrations in plant tissue were measured. The results of Griffing Analysis showed that general and specific combining abilities were significant for all traits except tiller number and K element. In terms of Take-all disease resistance, the best general combiners were 1622 and 729 genotypes, respectively. The best resistant hybrids were 2109×1546, 546×1528 and 1622×1526 that had the highest specific combining ability. Evaluation of genetic parameters by Hayman method for disease index and disease score confirmed the results of Griffing Analysis and showed that the dominance and over dominance of gene actions had the greatest importance in genetic control of the resistance to take-all disease (T-41 isolation). Finally, due to low narrow sense heritability and low genetic ratio in resistance to take-all disease, it can be concluded that selection for resistance to take-all disease does not respond well in early generations, so selection after purity, that done by bulk, single-seed descent and double haploid methods can be effective in wheat breeding.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 132

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 17 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources
نویسندگان: 

, ,

نشریه: 

اطلاعات دوره: 
  • سال: 

    1403
  • دوره: 

  • شماره: 

  • صفحات: 

    43-54
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    52
  • دانلود: 

    0
چکیده: 

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 52

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
نویسندگان: 

اطلاعات دوره: 
  • سال: 

    1399
  • دوره: 

    7
  • شماره: 

    -
  • صفحات: 

    23-26
تعامل: 
  • استنادات: 

    4
  • بازدید: 

    155
  • دانلود: 

    0
کلیدواژه: 
چکیده: 

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 155

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 4 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
اطلاعات دوره: 
  • سال: 

    1389
  • دوره: 

    1
  • شماره: 

    1
  • صفحات: 

    1-7
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    1092
  • دانلود: 

    148
چکیده: 

اسپکتروگرام بر اساس تبدیل فوریه پنجره شده متداول ترین روش تحلیل زمان - فرکانس است که هنگام آنالیز سیگنال های غیرایستا با محدودیت رزولوشن مواجه است. توزیع ویگنرویل در هر دو حوزه زمان و فرکانس رزولوشن ماکزیمم دارد اما وجود ترم های تداخلی، بکارگیری این توزیع را محدود کرده است. توزیع MP بر اساس اتم های گوسی اولا همواره مثبت است، ترم تداخلی نداشته، و رزولوشن مناسب دارد. در این مقاله نشان داده ایم که علاوه بر ویژگی های گفته شده که برتری این روش آنالیز را نسبت به دو روش مذکور روشن می کند، توزیع زمان - فرکانس بر اساس تجزیه وفقی سیگنال در مقابل نویز افزوده شده به سیگنال نیز مقاوم است. مقاومت در برابر نویز از ویژگی های ذاتی این توزیع است. به عبارت دیگر بدون پرداخت هزینه و تنها با محدود کردن تعداد مراحل تکرار الگوریتم تجزیه وفقی موفق به حذف و یا کاهش نویز می شویم. علیرغم آنکه توزیع MP بر اساس اتم های گوسی همواره مثبت است و رزولوشن مناسبی دارد، اما از توزیع زمان - فرکانس بدست آمده نمی توان کناری زمانی و کناری فرکانسی را بدرستی استخراج نمود. در این مقاله نشان داده شده است که با بکارگیری تکنیک MCE با استفاده از توزیع MP بعنوان تابع توزیع مثبت اولیه، می توان به توزیع زمان - فرکانس جدیدی رسید که از یک طرف حداکثر شباهت را به توزیع MP داشته باشد و از طرف دیگر مقادیر درستی برای کناری زمانی و فرکانسی از آن استخراج شوند.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 1092

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 148 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources
اطلاعات دوره: 
  • سال: 

    1402
  • دوره: 

    13
  • شماره: 

    4
  • صفحات: 

    41-60
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    30
  • دانلود: 

    7
چکیده: 

in this research, their effects on the flight of airplanes were investigated. The study area is the country of Iran, and the flight routes of Kermanshah, Ahvaz and BandarAbbas to Tehran. The research data includes maps of the Vertical Transect (profile) of the jet stream, the daily average of the Zonal wind (U-Wind) and meridional wind (V-Wind) components for the winter period of 2018 through NOAA/NCEP environmental databases. Also, flight route information was received from FlightRadar24 and Flightaware systems. First, by using Vertical Transect maps, the days containing strong U-Wind were extracted, and the average position of the core of the Jet Streams in the Zonal and meridional wind components, the Tropospheric level of 200 HP was detected. The list of flights was prepared, and the Zonal Wind maps were produced. Finally, the height of the flights was compared with the level of the currents of the Jet Streams, and the influence or lack of influence of the Jet Streams on the flights was studied. According to the results of the research, all the Jet Streams caused turbulence for all flights, and they caused a decrease in the speed of flights between Ahvaz and BandarAbbas to Tehran and an increase in the speed of flights between Kermanshah and Tehran according to the direction and type of Jet Streams. It was also found that all the Jet Streams had a speed of more than 90 knots, so the capacity to create tension and turbulence such as CAT was seen in them

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 30

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 7 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
نویسنده: 

یزدان پناه مهشید

اطلاعات دوره: 
  • سال: 

    1384
  • دوره: 

    6
تعامل: 
  • بازدید: 

    1769
  • دانلود: 

    0
کلیدواژه: 
چکیده: 

گسترش نقش خواسته های مشتری در فرآیند تولید و قرار گرفتن پژوهش مشتری در آغاز و پایان چرخه تولید و ارایه محصول، سیستم تولید و ارایه را از حالت است اندارد و تولید انبوه به سمت پروژه های تولیدی mass customization سوق داده است. علاوه بر آن بخش بزرگی از محصولات با بعد عظیم تاثیرگذاری و تاثیرپذیری اجتماعی در قالب پروژه های صنعتی، عمرانی، ساختمانی، تاسیساتی، زیربنایی و تسهیلات، تولید و ارایه می شوند که کیفیت و قابلیت اعتماد آنها سهم بسزایی در مسوولیت های اجتماعی دارد.پروژه ها بر حسب ماهیت خویش برای ارایه محصول با کیفیت به ابزار و روش های اثربخشی برای هماهنگ نمودن زمان، هزینه، انتخاب ها، منابع انسانی، تغییرات، اطلاعات، دانش فنی و تجارب نیاز دارند. در متدولوژی مدیریت پروژه ابزارهای کار تیمی، برگزاری جلسات برنامه ریزی شده، استفاده از ابزارهای مختلف برای توسعه منابع تفکر و اجرای یکسان (سینرژی، طوفان ذهنی، گردآوری نظرها)، ایجاد پارکینگ، لیست موضوعات، گردآوری یافته های پروژه، ارایه و دریافت بازخور و ایجاد سیستم اطلاعات Online پروژه، در نظر گرفته شده است. مطمئنا به کارگیری این ابزارها به صورت برنامه ریزی شده و هدفمند متولیان پروژه را در نیل به هماهنگی مورد نیاز و در نتیجه ارایه محصول با کیفیت یاری خواهد نمود. لیکن با توجه به پیچیدگی فرآیندها و گسترش نقش کیفیت محصول، علاوه بر ابزارهای متداول مدیریت پروژه، بهره گیری از تیم های cross functional در پدیدآوری محصولات با کیفیت و قابلیت اعتماد بالا نقش ویژه ای یافته اند. برای تعریف روشن تر کار تیمی cross Functional می توان گفت هنگامی که در تیم همه تخصص های تاثیرگذار و تاثیرپذیر وجود داشته باشند و بتوان فرصت های بهبود را از زاویه دید تخصص ها ی مختلف بررسی و راهیابی نمود، کار تیمی انجام شده cross functional محسوب می شود. دلیل نیاز به کار تیمی چند تخصصه، نتیجة رشد و توسعه تکنولوژی، پیچیدگی صنایع، ایجاد رشته ها و تخصص های جدید در فصل مشترک علوم و انتظار مشتری به دریافت پاسخ های همه جانبه برای مسایل خود است. مسلما مشتری انتظار دارد پاسخگویی به نیازهای وی بر حسب محدودیت های مکانی، زمانی و مالی انجام شود. به بیان روشن تر نه این امکان را دارد که تک تک نیازهای خود را با تجهیزات مجزا برآورده نماید و نه رضایت می دهد از برخی نیازهای خود صرفنظر کند و از همه مهمتر انتظار ندارد که در مقابل ایفای برخی از نیازها با عوارض و یا بازتاب های ناخواسته روبرو شود. همه این توقعات فرآیندهای دخیل در طراحی، تکوین و ارایه محصول به مشتری را بر آن می دارد که ویژگی های مورد نظر مشتری را از زاویه تخصص های مختلف تحلیل و راهیابی نمایند. به این ترتیب از یک سو راه های متعدد و متنوعی برای تبدیل خواسته ها، نیازها و انتظارات مشتری به ویژگی های کیفیت به دست می آید و از سوی دیگر این راه ها در اولین فرصت از دیدگاه تخصص های مختلف ارزیابی و آزمون می شوند. در نتیجه راه حل نهایی از بالاترین قابلیت اعتماد برخوردار است. در تدوین این مقاله از تجارب آموزش، مشاوره و تسهیلگری در تیم های مدیریت کیفیت پروژه استفاده شده است.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 1769

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 0
نویسندگان: 

نشریه: 

Journal of Heart

اطلاعات دوره: 
  • سال: 

    1398
  • دوره: 

    95
  • شماره: 

    -
  • صفحات: 

    1343-1349
تعامل: 
  • استنادات: 

    1
  • بازدید: 

    208
  • دانلود: 

    0
کلیدواژه: 
چکیده: 

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 208

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 1 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
نویسندگان: 

نشریه: 

Dicle Tip Dergisi

اطلاعات دوره: 
  • سال: 

    1398
  • دوره: 

    46
  • شماره: 

    1
  • صفحات: 

    27-32
تعامل: 
  • استنادات: 

    1
  • بازدید: 

    153
  • دانلود: 

    0
کلیدواژه: 
چکیده: 

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 153

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 1 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
litScript
telegram sharing button
whatsapp sharing button
linkedin sharing button
twitter sharing button
email sharing button
email sharing button
email sharing button
sharethis sharing button